Flexible, Transparent and Cost-Effective Lasers
October 25, 2019 | IMDEA NanocienciaEstimated reading time: 1 minute
A collaboration between IMDEA Nanociencia and Nanjing Tech University researchers produces flexible, transparent and cost-effective lasers.
The interest on plastic electronics and photonics has experienced a significant increase in the last decades due to the exceptional optical, semiconducting and mechanical properties of these materials. Plastic electronics, based on conjugated polymers, combine the benefits of cost-effective processability, compatible with large-area deposition for designing laser geometries of virtually any shape, not possible with rigid inorganic semiconductor materials. These highly luminiscent materials have been incorporated into a variety of resonator geometries, such as photonic crystals or distributed feedback (DBF) cavities, to enable optically pumped conjugated polymer lasers with emission across the visible and near-infrared spectrum.
A collaboration between IMDEA Nanociencia and Nanjing Tech University researchers have produced novel transparent, all-polymer DBF lasers. The DBF lasers make use of the periodic wavelength-scale nanostructures to backscatter photons for constructive interference. In their work, DBF structures were nanoimprinted on thermoplastic (cellulose diacetate) films and covered by highly luminescent conjugated polymers. In this way, the designed lasers present a homogeneous emission in the blue, green and red colors. Besides, the emission wavelength is tunable by bending the DBF flexible cavities.
The advantages of using thermoplastic materials such as cellulose diacetate as substrates are many: it is cheap, readily available, flexible and transparent even upon annealing. Also, cellulose diacetate is compatible with several organic solvents, it is obtained from renewable wood pulp and it is biodegradable. Researchers have demonstrated the robustness of their structures by assessing the lasing threshold values upon bending, confirming that the optical and structural properties of the active layer do not deteriorate.
The followed strategy is scalable and versatile. DBF lasers have currently a wide range of applications as mechanically flexible lasers, for instance, on lab-on-a-chip devices in biomedical analysis, information technology and sensing.
This work is a collaboration between the " Organic Photophysics and Photonics" group led by Juan Cabanillas, the "Nanostructured Functional Surfaces" group led by Isabel Rodríguez at IMDEA Nanociencia and Ruidong Xia from Nanjing Tech University, together with Daniel Granados and José C. Castro (IMDEA Nanociencia). The work has been partially funded by the Spanish Ministry of Economy, Industry, and Competitiveness, the Regional Government of Comunidad de Madrid and the Severo Ochoa Programme for Centres of Excellence in R&D, awarded to IMDEA Nanociencia.
Suggested Items
2024 Apple iPad Pro Estimated to Ship Between 4.5 to 5 Million Units
05/08/2024 | TrendForceApple’s recent product launch in May introduced a lineup of new tablets featuring advanced AMOLED screens. Notably, the Pro version boasts a dual-layer tandem structure designed to address the longstanding challenges of screen burn-in and lifespan that are common with AMOLED displays.
AIM Solder Signs Shinil Fl Ltd. as New Distributor for Korea
05/08/2024 | AIM SolderAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce a new distribution partnership with Shinil Fl Ltd., a prominent supplier of technological solutions in the SMT and semiconductor sectors.
IDTechEx Discusses Low-Loss Materials: The Enabler of Future Connected Vehicles?
05/06/2024 | IDTechExFuture connected vehicles will offer future drivers a safer, smoother, and more convenient driving experience. Not only will drivers get access to more navigation and entertainment options, but they will also gain access to safety technologies that will potentially reduce accidents, improve congestion, and reduce emissions globally by allowing vehicle safety systems to communicate with each other and with city traffic infrastructure.
LQDX Divests Aluminum Soldering Business - Mina™ - to Taiyo America Inc.
05/02/2024 | PRNewswireLQDX, formerly known as Averatek Corp., developer of high-performance materials for advanced semiconductor manufacturing, today announced that it has divested its aluminum soldering business – known as MinaTM – to Taiyo America Inc., a global market leader in advanced electronic materials.
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.