Happy’s Essential Skills: Failure Modes and Effects Analysis (FMEA)
April 6, 2016 | Happy HoldenEstimated reading time: 12 minutes
Figure 2: FMEA flow chart.
Steps in Performing FMEA
- Discuss and define system functional requirements (scope), including all modes of operation (list in order of decreasing importance). Is it for concept, system, design, process, product or service and customer needs?
- Develop a functional block diagram and a reliability block diagram (Figure 2) for each subassembly being analyzed.
- Define parameters and functions of each functional block required for successful operation of the system.
- Using the FMEA forms to document the further steps, identify potential failure modes for each of the functional blocks.
- Analyze system or subassembly functions affected by factors such as those in the list of FMEA considerations.
- Identify all possible causes for each failure mode of the functional block being analyzed. The causes must be detailed to the component level wherever possible. These are potential failure modes. If necessary, go back and rewrite the function with more detail to be sure the failure modes show a loss of that function.
- Identify all possible ways the failure modes could affect the functions of the higher level assemblies.
- Assign the frequency, criticality, and detection values for each failure mode. (Tables 1– 3)
- Obtain the RPN by multiplying the three values assigned in step 8. This priority number will allow us to focus on the most important failure modes first.
- Determine all the possible root causes and corrective actions for each failure mode, and update the design status as it progresses.
- Summarize the failure modes and corrective actions in order of decreasing RPN.
- Focus on eliminating at least the 50% of the failure modes with the highest RPN.
An example of a FMEA analysis is shown in Figure 3.
Page 3 of 5
Suggested Items
A Potpourri of Design PD Classes
05/14/2024 |What is invention without innovation? What is innovation without capability? Kelly Dack addresses these questions and more in this review of the Professional Development courses at IPC APEX EXPO, including the flex course lead by "Flexperts" Mark Finstad and Nick Koop.
Real Time with… IPC APEX EXPO 2024: Precision Tools and Problem-solving With Perfect Point
05/14/2024 | Real Time with...IPC APEX EXPOIn an interview with Guest Editor Dan Beaulieu, Alex Girardot, a field applications engineer with Perfect Point, shares his experiences with precision tooling. Alex also discusses a challenging project involving thick boards and small diameter holes in which Carbonite tools with a hybrid design were used. They also discuss the trend toward smaller hole sizes.
Breaking High-speed Material Constraints: Design007 Magazine — May 2024
05/14/2024 | I-Connect007 Editorial TeamDo you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems instead of high-speed materials, saving time and money while streamlining the fab process. In the May 2024 issue of Design007 Magazine, our contributors explain how to avoid overconstraining your materials when working with high-speed boards.
Redwire Announces Development of New European-Built Very Low Earth Orbit (VLEO) Spacecraft Platform called Phantom
05/13/2024 | BUSINESS WIRERedwire Corporation, a leader in space infrastructure for the next generation space economy, announced Phantom, a new European Very Low Earth Orbit (VLEO) spacecraft platform.
Emerald Technologies Acquires Optimum
05/13/2024 | Emerald TechnologiesEmerald Technologies announced its acquisition of Optimum Design Associates, Inc. (Optimum), a leading electronic design and engineering services company. Terms were not disclosed.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved.
Log in