OE-A Business Climate Survey – Partly Sunny Skies for Printed Electronics Industry
November 8, 2022 | OE-AEstimated reading time: 2 minutes
“For 2022 we have an expected sales revenue of plus 13 percent for the Flexible and Printed Electronics Industry. The outlook for 2023 is even more positive, with an expected increase of 24 percent. This is the highest figure since this business climate survey was initiated in 2014”, reviews Dr. Klaus Hecker, OE-A Managing Director, the results of the latest business climate survey. A biannual survey conducted by OE-A (Organic and Printed Electronics Association), a Working Group within VDMA (Mechanical Engineering Industry Association). “But if the skies of our industry are really sunny or rather cloudy the next months will show. Challenges in the supply chain, rising energy costs, inflation and the Russian war in Ukraine are adding uncertainty to the pleasing forecast”, adds Klaus Hecker.
OE-A expects 24 percent sales growth for 2023 compared to 2022
With a turnover sales forecast of +13 percent for 2022 the result of the previous forecast from February 2022 (+ 12 percent) is validated. Nevertheless, the Russian war has its impact on the Flexible and Printed Electronics Industry. More than two thirds (68 percent) of the companies state, that they were negatively affected by the war in Ukraine. Nearly every company in the above two-thirds says it endures supply chain disruptions and a price increase.
Particularly challenging to source for the Printed Electronics (PE) Industry are electronic components, chemicals, and metals. The respondents do not expect the situation to improve in the next 6 months. This is especially challenging for printed electronics since the main targeted end user industries are Consumer Electronics, Automotive, Medical & Pharmaceutical and Building & Architecture.
Another preoccupying situation is the slower recovery of the markets and customer demand. Compared to the survey in February 2022, less companies have noticed a recovery in demand for the business in Europe and North America. More companies then in the survey before (27 percent compared to 24 percent) used or plan to use government and Corona support programs. “For the Asian continent the demand revival is expected to take even longer. This is tough for our industry and clouds the bright outlook of +24 percent sales growth along the entire value chain for 2023”, explains Klaus Hecker.
Sunny side up
Despite all ambiguities 2023 is a promising year for the Flexible and Printed Electronics Industry with respect to investments in production and R&D. More than 75 percent of the surveyed companies will increase investing in production and R&D activities in the upcoming half year. Furthermore, the employment situation is also encouraging: 88 percent of the responding companies plan for a stable employment situation, with 12 percent planning to increase their staff. “Despite all difficulties and hurdles in the next months the PE industry will continue to bloom and grow. Our industries superpower is a certain resilience and innovative strength, and I am looking forward to seeing the latest product innovations at electronica and LOPEC 2023”, summarizes Dr. Klaus Hecker.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).