Mr. Laminate Tells All: Where in the Holy Halogens did 900, 900, 1500 Come From?
November 12, 2015 | Doug Sober, Essex Technologies GroupEstimated reading time: 4 minutes
I took the requirements from IEC-61249-2-21 and imported them into the IPC standards development process, creating document IPC-4101/92. The test method for the determination of halogen content in base materials, IEC 61189-2C12, was imported into the IPC manual simply by rewriting it in IPC format. IPC-TM-650 Method 2.4.41 was the test method number used by the IPC to determine the halogen content of FR-4 CCL. Underwriters’ Laboratories (UL) uses this test today to define which products are ANSI grade FR-4.0 and which are ANSI grade FR-4.1.
From that time, other IEC and IPC documents have been developed for epoxy, polyimide and cyanate ester halogen-free CCL grades and prepregs. The requirement has also always remained as 900, 900, and 1500, as previously discussed. Only one test method has been referenced.
Neither TC91/WG4 nor IPC planned to use this requirement for any other products other than CCL in the electronics supply chain. The specification was developed for and was only applicable to FR-4 CCL and prepreg. However, some years later, several OEM computer manufacturers and others decided that the 900, 900, 1500 requirements could be applied to everything else in the electronics supply chain, including soldermask, legend ink, adhesives, cases and power cords. PVC, used in many electronics applications, was now also to be eliminated as it contained chlorine.
This expansion to other materials was supposed to be documented in a new standard, IPC/JEDEC Joint Standard 709, but there was controversy as to why a CCL specification had relevance to soldermask or adhesive or anything else for that matter. There was also a belief that chlorine and bromine should only be reported if it came from organic chlorine and bromine found in flame retardants. Additionally, there was also discontent as to why fluorine was not considered a halogen for definition purposes. I still wonder that, too. However, after several years of meetings, comments and balloting, this document was never published by IPC, but JEDEC did decide to publish by itself and under their own logo.
I have seen many announcements in trade journals indicating that some new material in the electronics supply chain has been developed and is halogen-free based on the 900, 900, 1500 requirements. Of course these requirements are not related to any historical testing on the materials referenced. The requirements are not being pulled from thin air but more like rarified air.
I apologize on behalf of myself and Dr. Shibata for creating this requirement that has been exported into so many areas unrelated to CCL.
Doug Sober is the president of Essex Technologies Group and may be reached by clicking here.
Page 2 of 2Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.