Solder Mask Tack Dry
As a general rule, the tack-dry temperature should be as low as possible; in other words, it should only be as high as necessary. If the temperature is too low, the evaporation rate for the solvent will be to slow, and the solder mask will not dry in a reasonable amount of time. If the temperature is too high, however, the dry time certainly will be excellent, but it could create a solder mask lock-in with repercussions by the developing time.
Catching up With Greg Papandrew
It’s always great to catch up with old friends, and last week, I met with Greg Papandrew, a well-known industry entrepreneur, who I worked with on his first company (Bare Board Group). Greg discusses his new business, Better Board Buying (B3).
Meet George Milad, I-Connect007 Columnist
Meet George Milad, one of our newest I-Connect007 columnists! George’s columns will cover PCB plating, IPC specifications, and more. George is the recipient of the 2009 IPC President’s Award, chairs the IPC Plating Committee, and is a permanent member of the IPC Technical Activities Executive Committee.
Chinese Review: The 2018 NTI-100 Top Global PCB Fabricators
Yonglin Gong, senior engineer, deputy secretary-general of the China Printed Circuit Association (CPCA), and editor-in-chief of CPCA Printed Circuit Information Magazine, takes a look at the NTI-100 data and provides his analysis from the Chinese perspective.
Meet Imran Valiani, I-Connect007 Columnist
Imran Valiani has been in the industry and with Rush PCB for over five years as an account manager. During that time, he has developed a keen and unique understanding of the importance of time to market. Imran has worked with a number of key customers, helping them develop systems and programs to ensure that most productive and fastest time to market possible.
Prototron Receives MIL-31032 and AS9100 Certifications
Kim O’Neil, general manager of Prototron Circuits in Tucson, Arizona, discusses the company’s recent MIL-31032 certification and how this experience prepared them for the AS9100 certification. He also explained why auditing is a good thing for any company’s processes and highlighted some of the areas that the auditors inspected.
Communication, Part 3: Why Do Board Shops Ask So Many Questions?
In Part 3, Bob Chandler from CA Design and Mark Thompson from Prototron Circuits speak with Steve Williams about the importance of preparing, sending, and receiving comprehensive (and ideally, perfectly complete) design data packages. If you’ve ever wondered why the CAM department asks you so many questions, read on.
Happy Holden Previews His AltiumLive Frankfurt Keynote
I recently sat down for an interview with Happy Holden, who is slated to give a keynote speech at this year’s AltiumLive event in Frankfurt, Germany. Happy gives a preview of his presentation, which is focused on smart factories and automation, and why artificial intelligence might improve PCB design and fabrication in the future.
Additive Electronics Conference Set for October 2019 Debut
Kelly Dack and Tara Dunn talk about the upcoming conference "Additive Electronics: PCB Scale to IC Scale" on October 24, 2019, hosted by SMTA in San Jose, California, and why it's an important event for people to attend—especially those involved in the design process.
Chuck Bauer: SMTAI 2019 Founder's Award Recipient
At the recent SMTAI conference and exhibition, Chuck Bauer, Ph.D., senior managing director at TechLead Corporation, received the Founder's Award, a prestigious award given to a member who has made exceptional contributions to the industry and provided ongoing support and service to the SMTA.
Communication, Part 2: Design Data Packages
The first part of this six-part series highlighted ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop. In Part 2, Bob Chandler and Mark Thompson talk about the importance of preparing, sending, and receiving comprehensive (and ideally, perfectly complete) design data packages.
SMTA Additive Electronics Conference: Industry Trends
Mainstream PCB manufacturing is often limited to 50-75 microns (mm) line and space. But the electronics industry is evolving quickly. Propelled by the demand for more sophisticated electronics, PCB design is being tasked with finer lines, thinner materials, and smaller via sizes.
New High-speed 3D Surface Imaging Technology in Electronics Manufacturing Applications
Line confocal sensors—and scanners based on them—are used in the imaging of surfaces, transparent materials, and multi-layered structures in various metrology and inspection applications on discrete parts, assemblies, webs, and other continuous products. Line confocal sensors operate at high speed and can be used to scan fast-moving surfaces in real-time as well as stationary product samples in the laboratory.
Communication, Part 1: How to Qualify a Board Shop
In Part 1 of this six-part series for "Fab Fridays," Mark Thompson, CID+, engineering support at Prototron, and CA Design CTO Bob Chandler discuss ways that PCB fabricators and designers can better communicate, starting with how to qualify a board shop.
The Institute of Circuit Technology Autumn Seminar
Meriden has been established as a popular Midlands venue for Institute of Circuit Technology (ICT) meetings. On September 19, a multitude of Fellows, Members, and Associates gathered for the Institute’s autumn seminar, which was organised and hosted by ICT Technical Director Bill Wilkie. The agenda included five informative technical presentations, describing current research and development on significant topics relevant to the industry.
Meet Dana Korf, I-Connect007 Columnist
Meet Dana Korf, one of our newest I-Connect007 columnists! Dana’s columns will focus on IPC-2581 as well as PCB front-end tooling, data quality, DFM processes, etc.
Additive Electronics Conference Set for October 2019
Tara Dunn, president of Omni PCB and I-Connect007 columnist, and Lenora Clark, director of autonomous driving and safety technology at MacDermid Alpha Automotive, discuss what can be expected from the upcoming Additive Electronics Conference in San Jose, California, the impetus and motivation behind the conference, and who can benefit the most from attending.
Robert Feranec: A Lifetime of PCB Design
Robert Feranec, a popular YouTuber and founder of the FEDEVEL Academy, discusses with Andy Shaughnessy the upcoming keynote he’ll be giving at AltiumLive in San Diego, California, and how he's helping people around the world understand and optimize their PCB design processes.
EIPC Summer Conference 2019, Day 2
In this article, EIPC Chairman Alun Morgan provides the highlights of the second day of the EIPC 2019 Summer Conference, which was held in the beautiful city of Leoben in central Austria. He also talks about key points of the numerous technical presentation at the conference.
Selecting the Proper Flex Coverlayer Material
Coverlayers are polymer materials used to cover and protect the copper traces of the flex circuit product. There are a number of different options available for protecting the circuits, and they serve different design requirements in terms of cost, performance, and flexural endurance optimization. When specifying the choice, it is critical to call out not just the type of coverlayer material but also the thickness requirement. This can be very important in certain types of constructions, especially when a flex circuit will experience dynamic flexing during use.
Chemcut: Wet Processing Equipment for the Long Haul
Chemcut CEO and General Manager Rick Lies speaks about the growth he has seen in the marketplace over his 18 years in the industry, and how Chemcut has been able to remain competitive in the PCB and photochemical milling spaces. Jerry Reitz, Chemcut’s HES manager, also addresses the current shift towards zero-discharge facilities.
The Advantages of Non-sludge Acid Copper Products
Mike Wood, technical director with Cerambus Asia Pacific, discusses the acid copper product from Cerambus Technology Inc. that doesn't generate sludge during the plating process and operates at higher production output by using higher current density. He talks about why this is important for the state of the vertical continuous plating (VCP) market in Asia, and the trends he’s seeing in that space.
Meet Mike Hill, I-Connect007 Columnist
Mike Hill has been in the PWB fabrication industry for over 40 years. Throughout his career, he has been a member of IPC and participated in specification writing for both IPC and the military. Within IPC, he has received the President's Award, General Chairmanship, Committee Chairmanship, and many other recognitions. In his columns, Mike will help you better understand the requirements and how-to's for MIL-PRF-31032 certification for PWB fabrication.
Vertical Conductive Structures, Part 3: Design Tool Techniques
New vertical conductive structure (VeCS) technology can reduce layer count and improve signal integrity without the need for sequential technologies. VeCS is different than traditional through-hole vias, microvias, and ELIC designs, which are more expensive and require a high number of laminations, drilling, and plating cycles to build up a reasonable number of layers.
Solder Mask Curing: UV Bump Overview
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.
Meet Chris Mitchell, I-Connect007 Columnist
Chris Mitchell is vice president for global government affairs at IPC—Association Connecting Electronics Industries—where he is responsible for development and implementation of the organization’s global advocacy efforts and public policy agenda with a focus on electronics industry business improvement, environment, health and safety, and defense initiatives.
How to Feed Test Data Back to Engineering for Process Improvement
Some people think of the PCB manufacturing process as a black box: design data goes to the manufacturer (fabrication house), and magically, the finished PCB is produced. While it may have been like that in the past, in actuality, fabricating PCBs today is quite a ballet of processes.
Crowded Congressional Calendar Affects Industry Priorities
More than five months remain in 2019, but U.S. congressional leaders are already running out of time as they face a long list of must-pass bills before year’s end. Although some of these bills do not affect the electronics industry, some of them do, and the overall agenda does affect the opportunities and risks we face.
A Conversation with Karen McConnell—An Emerging Engineer Program Mentor
IPC’s Emerging Engineer program, launched in 2016, provides early career professionals an opportunity to learn from dedicated industry volunteers who participate in IPC standards development. IPC’s editorial staff had the opportunity to talk with one of those dedicated volunteers, mentor Karen McConnell, Senior Staff Engineer CAD CAM, Northrop Grumman, about why she participates as a mentor in IPC’s Emerging Engineer program.
How Changing Cleaning Technologies Affect Reliability
At the recent IPC High-Reliability Forum and Microvia Summit, Andy Shaughnessy spoke with Michael Konrad, founder and president of Aqueous Technologies and a speaker and panelist at the event in Baltimore, Maryland. They discussed Konrad’s presentation and the recent proliferation of cleaning, from solely high-reliability products to Class 1 consumer products.
Microvias: Links of Faith are Not Created Equally
Microvias connect adjacent copper layers to complete electrical paths. There are copper-filled microvias, which can be stacked to form connections beyond adjacent copper layers, and staggered microvias, which stitch adjacent copper layers with paths that meander on the layers between the microvias. This article discusses the various laser-drilled microvias and presents SEM photographs to begin the search for the root cause of weak copper interface.
Reliability... It All Comes Down to the Landing
Our industry is embarking on a new age of technical development to achieve much higher levels of overall reliability that will be required of the devices we fabricate. Whether in medical devices, autonomous vehicles, or in IoT, reliability will be crucial to both our success and safety.
Dissecting the IPC Regional Survey on PCB Technology Trends
Sharon Starr, Denny Fritz, and Mike Carano talk about the global 2018 IPC Technology Trends Report released early this year—the size of the survey, how it was conducted, the general findings, and regional differences. They also shared their takeaways and regional insights, and the industry outlook over the next five to 10 years.
Virtual Verification Station From CIMS Enhances AOI Capabilities
At this year’s CPCA Show, CIMS Marketing and Technical Director Vladi Kaplan spoke to Barry Matties about a number of add-ons CIMS designed to further enhance their AOI capabilities and systems. He described their Virtual Verification Station (VVS), CIMS Quality Center (CQC), and Software Development Kit (SDK) as well as trends he sees with laser via inspection.
Technically Appropriate Material Choices Are Key to Success
Materials are no longer a passive part of the design; they play an active role in the manufacturability, reliability, and speed of a PCB. Editor Nolan Johnson and Mike Creeden, founder of San Diego PCB Design, discuss several key characteristics that designers should consider in their material selection process.
Emma Hudson: From Tomboy to Tech Lead
In this interview, Emma Hudson, CTO of Gen3, and Gayle Paterson, founder of Female Leaders in Tech, Everywhere (FLITE), discuss careers and the electronics industry.
AWE 2019: Go XR, Be Awesome
Dan Feinberg attended and covered the recent 2019 Augmented World Expo (AWE) and conference in Santa Clara, California. The event featured the latest developments and technologies in augmented (AR), mixed (MR), virtual (VR), and extended virtual reality (many just call it all XR to make it simple). Here's a wrap-up of the event.
Microtek Labs: Providing Trusted Testing in the Chinese Market
On a recent visit to Microtek Laboratories' Changzhou facility, Barry Matties, publisher, and Edy Yu from the I-Connect007 China team spoke with chairman and CTO Bob Neves about the changes he has seen living and doing business in China over the past 15 years, and the increased importance of standards and testing as China moves into manufacturing more high-reliability products.
IPC’s PCB Tech Trends Study Highlights Issues Impacting Fabricators
The 2018 survey results indicated the need for speed and low loss as critical functions of the materials chosen. This is the digital age, and with the Internet of Things, virtual and augmented reality, vehicle-to-vehicle communication, etc., the need for low-loss and ultra-low-loss materials continues to grow as a percentage of circuit boards fabricated.
DuPont on Materials Challenges and New Opportunities
John Andresakis, senior marketing technologist in the Interconnect Solutions (ICS) Group of DuPont, and Jonathan Weldon, RF applications engineer also in ICS at DuPont, spoke with the I-Connect007 editorial team about trends the company is seeing, what challenges their customers are facing with materials today, and future opportunities with new technologies, including 5G, electric cars, IoT, and more.
Creating Stability in Materials Chaos
Nolan Johnson and Tony Senese—manager, business development group, Panasonic EMBD—discuss the evolution of the materials marketplace over the years from a time when the market aligned for the rise of Panasonic’s MEGTRON 6 to the ever-changing materials industry of today. With the ramp-up to 5G and everyone pushing product development, Tony describes a chaotic materials market flooded with new companies and materials.