Rogers to Showcase Advanced Connectivity Material Solutions at IPC APEX 2016
March 4, 2016 | Rogers CorporationEstimated reading time: 3 minutes
Rogers Corporation will be exhibiting at the upcoming IPC APEX Expo, scheduled for March 15-17 at the Las Vegas Convention Center (Las Vegas, Nevada).
On the conference side, John Coonrod, Technical Marketing Manager for Rogers Advanced Connectivity Solutions, and author of the popular ROG Blog series, will present his paper on “High Frequency RF Electrical Performance Effects of Plated through Hole Vias” on March 16th at 10:30 AM.
Representatives from Rogers Corp. (www.rogerscorp.com) will be exhibiting at Booth #607, providing information and insight on the use of their circuit materials, including ULTRALAM® 3850HT, CLTE-XT™, TC350 RO3003 and XT/duroid laminates. Rogers will also be previewing its new material system developed for extremely low loss digital applications.
ULTRALAM 3850HT high-temperature (HT) liquid-crystal-polymer (LCP) circuit material delivers improved manufacturability in multilayer circuits. Its high melt temperature of +330°C improves multilayer layer-to-layer registration and offers improved thermal stability, while its low effective dielectric constant (3.14 @10GHz), low loss (0.002), and thin core offerings make it an ideal circuit material for millimeter wave frequencies, including 77 GHz used in long range automotive collision-avoidance radar systems. Being highly impermeable, this material is an attractive alternative to ceramic for MMIC (monolithic microwave integrated circuit) packaging.
CLTE-XT laminates are formulated for use in some of the most demanding phase-sensitive applications in communications, radar and electronic-warfare (EW) circuits and systems. These composite materials are ceramic-filled PTFE based circuit materials with woven fiberglass reinforcement. With eXtended Technology™, CLTE-XT laminates maintain a low Dk of 2.94 across wide temperature ranges. CLTE-XT laminates provide excellent dimensional stability, with lower loss than the original CLTE™ circuit materials.
TC350 laminates are for designers seeking a cost effective high thermal conductivity PTFE material. These materials are designed for applications where high power RF signals demand improved PCB thermal management. With a combination of low loss tangent (0.0020 at 10GHz), high z-axis thermal conductivity (1.0W/m°K), low z-axis CTE (23 ppm/°C), and world class temperature phase stability (-9ppm/°C), TC Series laminates enable improved performance and reliability in high power applications. TC Series materials are ideal for high volume applications with panel sizes available as large as 48”x54”. TC Series materials are often chosen for applications such as power amplifiers and devices such as couplers, combiners, and dividers.
RO3003 laminates are ideal for loss-critical millimeter wave frequency designs, where consistent circuit performance matters, such as automotive radar sensors and point-to-point microwave backhaul communications systems. While already a benchmark for 77 GHz automotive radar sensors, RO3003 3.0 dielectric constant laminates are available with ½ ounce and 1 ounce rolled copper foil. Combining the very low dielectric loss of the RO3003 PTFE-ceramic resin system with smooth foil, results in high frequency circuit materials with best-in-class insertion loss. Also available with up to 0.040” thick copper plate.
XT/duroid laminates utilize PEEK (polyether ether ketone) based dielectric cores. PEEK is a high melting point polymer (Tm = 343C/649F) with excellent chemical and radiation resistance. This makes XT/duroid copper clad laminates an excellent choice for flex/rigid printed circuit boards that are exposed to harsh environmental conditions (e.g., aeronautics, oil & gas deep hole drilling, etc.) During the Large High Temperature Flexible Printed Circuits Board (LHTFPCB) project, under the European funded Clean Sky program, XT/duroid laminates passed more than 3700 hours at 260C (500F) continuously followed by 2x 8 hours vibration testing at 260°C (500F) without failure. XT/duroid laminates are available in various thicknesses starting at 2mil (50µm), are halogen free and inherently flame retardant. These laminates have very good dielectric strength, very low thermal resistance and provide excellent high frequency performance when utilizing low profile copper foil. Both the dielectric constant and dissipation factor are stable over a wide range of frequencies and temperature.
About Rogers Corporation
Rogers Corporation is a global technology leader in engineered materials to power, protect, and connect our world. With more than 180 years of materials science experience, Rogers delivers high-performance solutions that enable clean energy, Internet connectivity, advanced transportation and other technologies where reliability is critical. Rogers delivers Power Electronics Solutions for energy-efficient motor drives, vehicle electrification, and alternative energy; Elastomeric Material Solutions for sealing, vibration management, and impact protection in mobile devices, transportation interiors, and performance apparel; and printed-circuit materials for wireless infrastructure, automotive safety, and radar systems. Headquartered in Connecticut (USA), Rogers operates manufacturing facilities in the United States, China, Germany, Belgium, Hungary, and South Korea, with joint ventures and sales offices worldwide. For more information, click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: