DuPont Microcircuit Materials Intros New Inks for Printed Electronics
September 22, 2015 | DuPontEstimated reading time: 1 minute
DuPont Microcircuit Materials (DuPont) is launching electronic inks that cure quickly at low temperatures, expanding the possibility of printing electronics onto an entirely new group of plastic films. The technology is expected to enable electronic components such as sensors, heaters and antennas to be printed on more versatile and less expensive substrates.
“This really opens new doors for application designers,” said Kerry Adams, segment manager, DuPont Microcircuit Materials. “As DuPont continues to expand its portfolio of advanced materials to meet the needs of the printed electronics market, we continue to look for ways to offer cost savings and the potential to put electronics into almost any device.”
Historically, electronic inks have required curing temperatures between 100°C and 140°C restricting electronic substrates to those that can survive at high temperatures. The new DuPont PE827 and PE828 low-temperature inks cure at as low as 60°C, opening up the possibility for printed electronics designers to use less expensive plastic films. By expanding substrate choices, the possibility for implementing printed electronics in new applications continues to grow. Potential applications could include printed antennas, sensor applications, heated surfaces and smart packaging applications.
Substrates that are now viable options for printed electronics include PVC, polystyrene, high-density polyethylene, and acrylic polymers, among others.
DuPont Microcircuit Materials (MCM) is a leading innovator and high-volume supplier of electronic inks and pastes that offers a broad range of printed electronic materials commercially available today. The growing portfolio of DuPont MCM electronic inks is used in many applications, including forming conductive traces, capacitor and resistor elements, and dielectric and encapsulating layers that are compatible with many substrate surfaces including polymer, glass and ceramic.
MCM has over 40 years of experience in the development, manufacture, sale and support of specialized thick film compositions for a variety of electronic applications in the consumer electronics, automotive, photovoltaic, biomedical, military and telecommunications markets. For more information on DuPont Microcircuit Materials, visit http://mcm.dupont.com.
About DuPont
DuPont has been bringing world-class science and engineering to the global marketplace in the form of innovative products, materials, and services since 1802. The company believes that by collaborating with customers, governments, NGOs, and thought leaders we can help find solutions to such global challenges as providing enough healthy food for people everywhere, decreasing dependence on fossil fuels, and protecting life and the environment.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).