The Flex-to-Fit Approach
June 4, 2015 | Tara Dunn, OMNI PCBEstimated reading time: 1 minute
The flex-to-fit concept reminds us that creativity and engineering go hand-in-hand. Imagine this scenario: As an engineer, you have been tasked with the challenge of adding sensors to the front spoiler lip of the new 2015 Porsche Cayman.
There is limited space available and the cavity is thin enough that running even a small wire bundle would be difficult. What do you do? Let’s take a look at the flex-to-fit concept.
When there is not ample space for a conventional approach, this process, which is the convergence of the mechanical world and the electronics world, results in the ability to design a flexible circuit along the contour of an existing, irregularlyshaped structure. By taking the mechanical part, extruding the surface and then conforming to that surface, a flex circuit can be created that will fit perfectly within the confines of a limited space or cavity. In a recent conversation with Mike Brown, of Interconnect Design Solutions, he helped to clarify this process, and we discussed several exciting applications. He also explained the benefits to the flexible circuit design process.
Most electronic systems require an enclosure to support a rigid PCB. Looking beyond the constraints of an enclosure and incorporating flexible circuits within the contours of other existing structures, opens up endless possibilities. In the example of the Porsche Cayman, imagine this solution: The valence of the front spoiler lip is mechanically digitized and recreated in a 3D MCAD model.
To read the full article, click here.
Editor's Note: This article originally appeared in the June 2015 issue of The PCB Magazine.
Suggested Items
Signal Integrity Expert Donald Telian to Teach 'Signal Integrity, In Practice' Masterclass Globally
04/17/2024 | PRLOGDonald Telian and The EEcosystem announce the global tour of "Signal Integrity, In Practice," a groundbreaking LIVE masterclass designed to equip hardware engineers with essential skills for solving Signal Integrity (SI) challenges in today's fast-paced technological landscape.
Designing Electronics for High Thermal Loads
04/16/2024 | Akber Roy, Rush PCB Inc.Developing proactive thermal management strategies is important in the early stages of the PCB design cycle to minimize costly redesign iterations. Here, I delve into key aspects of electronic design that hold particular relevance for managing heat in electronic systems. Each of these considerations plays a pivotal role in enhancing the reliability and performance of the overall system.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/12/2024 | Nolan Johnson, I-Connect007As we publish this week’s most-read news, the I-Connect007 team is wending its way home from an eventful and productive week at IPC APEX EXPO in Anaheim, California. We’ve posted a variety of dispatches from the show this week, released 73 realtimewith.com video interviews (and counting), and also gathered the content and updates you’ll be looking for in the upcoming issue of Show & Tell… IPC APEX EXPO 2024.
Material Insight: The Importance of Standards for the Chip Packaging Industry
04/12/2024 | Dr. Preeya Kuray -- Column: Material InsightI had the great pleasure of recently attending the National Institute of Standards and Technology’s (NIST) CHIPS R&D Chiplets Interfaces Technical Standards Workshop. The purpose was to bring together technical experts across industry and academia to deliberate one of the most pressing technological matters of 2024: chip packaging standards.
What’s New in Design Education at IPC APEX EXPO?
04/11/2024 | Kelly Allen, IPC Training ManagerKelly (Kel) Allen shares her thoughts on the educational offerings at IPC APEX EXPO and beyond. In this interview, she discusses some of the newest classes taking place during the conference in Anaheim, covering everything from design, fab, and assembly through mil/aero, test, and supply chain issues.