Car MEMS Sensors Achieve Record Sales in 2010


Reading time ( words)

Driven by the rapid recovery in automotive production and inventory rebuilding among sensor component suppliers, the market for automotive microelectromechanical system (MEMS) sensors will expand to record size in 2010, according to the market research firm iSuppli Corporation, now part of IHS Inc.

Marking a new high point for the industry, shipments of automotive MEMS sensors will reach 662.3 million units in 2010, up a robust 32.1% from 501.2 million units in 2009. The projected year-end levels--including the replenishment of inventory that was depleted during the recession of 2009--will exceed even the pre-crisis high point in 2007 of 640 million sensors, iSuppli research shows.

The recovery in automotive MEMS shipments represents a turnaround from the depressed levels of 2009 when shipments cratered and reached a nadir, and the years ahead will provide additional room for expansion.

Nonetheless, growth will slow in 2011, with shipments anticipated to climb just 7.3% as the market normalizes following the exuberance in 2010. Production then will pick up again in 2012, and growth rates will end up north of 13% by 2014, as shown in the attached figure.

Big Shapers, New Applications

“One significant engine of automotive MEMS growth is the use of sensors in passenger cars supporting mandated safety technologies such as electronic stability control (ESC) and tire pressure monitoring systems (TPMS),” said Richard Dixon, Senior Analyst for MEMS and Sensors at iSuppli. “The United States and Europe have led the adoption of legislation on such safety systems, and other countries like Australia and Canada, have quickly followed suit. However, similar mandates are now being adopted in South Korea and are expected in Japan, accelerating overall adoption rates worldwide.”

The extra opportunity from both ESC and TPMS for automotive MEMS suppliers to Japan and Korea will correspond to additional revenue of some $120 million in those regions alone for the next five years, Dixon added.

China also will account for a large portion of the automotive MEMS action. Compared to U.S. or European vehicles, the electronics content of low- and mid-range vehicles in China is about 50% less. However, sensor penetration will steadily increase--first in powertrain applications to reduce carbon emissions that choke Chinese cities and afterward as safety sensors for additional airbags and ESC systems.

Among the new applications providing suppliers greater production opportunities for automotive MEMS sensors, the most prominent include usage of gas sensors to control air quality in the cabin; infrared thermopiles to monitor temperature; microbolometers to aid night-vision systems; and MEMS oscillators to boost rear-view cameras.

Sensor fusion will be a contentious issue, however. While the sales of accelerometers used to measure inclination as part of an electronic parking brake (EPB) will accelerate in Europe in the next five years, EPB prospects are also dampened by ESC systems, which already contain the two-axis accelerometers capable of delivering the required inclination signal for parking brakes.

Sensor fusion uses existing sensor signals and adds application algorithms to augment existing systems, such as ESC, with features like hill-start-assist functionality, for instance. This is a bane for sensor suppliers, which must rely on opportunities that involve standalone systems to provide additional sensors. On the other hand, inclination-based car alarms do not access accelerometers in ESC systems and require standalone accelerometers.

Other applications that will propagate the use of sensors include passenger protection systems that detect impacts by means of either accelerometers or pressure sensors located in the front bumper, as well as stop-start systems that need pressure--and other non-MEMS based measurements to supply critical data when a vehicle’s engine is turned off at a junction.

Inroads Also Being Made By Consumer-Oriented Suppliers

iSuppli also notes that some consumer-oriented MEMS sensor suppliers are making inroads into the automotive market, widening the pool of players participating in the space.

In particular, STMicroelectronics, the leading MEMS supplier for consumer and mobile applications and which so far has targeted non-safety critical automotive applications, such as car alarms and navigation, has now entered the airbag market with a high-g accelerometer. STMicroelectronics is expected to leverage its significant manufacturing economies of scale, which likely will lead to additional price pressure and new cost structures in the industry.

Learn more about the latest developments in the MEMS market with the recent MEMS brief, entitled: Automotive MEMS Market Witnessing a Record 2010.

For more information, visit www.isuppli.com.

Share



Copyright © 2015 I-Connect007. All rights reserved.