University of Illinois Researchers Create Low-cost High-Yield Plastic Microprocessors

Reading time ( words)

Supercomputers can crunch massive data sets and give us insights into the wonders of the universe. But a sub-penny microprocessor that flexes to fit on a beer bottle and tells you whether your brew is still cold? Creating that technology has been surprisingly more difficult to achieve.

Recently, a team of researchers from the University of Illinois Urbana-Champaign said: hold my beer. Working with British flexible electronics manufacturer PragmatIC Semiconductor, the researchers developed the first commercially viable flexible plastic microprocessor chips, called FlexiCores, that can be manufactured at scale for less than a penny per unit.

The new processors could help even everyday objects become “smart.”

“For example, you could put processors on bandages to detect whether a wound is healing, or add them to consumer goods packaging to track progress along the supply chain,” said Rakesh Kumar, a professor of electrical and computer engineering and researcher in the Coordinated Science Lab at UIUC. “The challenge has been creating a processor that can be both cheaply produced and flexible enough to fit snugly even against uneven surfaces on our body, packages, or beer bottles.”

Researchers solved the problem in part by turning to plastic, instead of silicon, as the basis of the chips. Silicon is the industry standard for semiconductors, but it has inherent limitations due to its cost and its inflexibility. Kumar and his team built the FlexiCores on thin-film transistors made with the semiconductor indium gallium zinc oxide (IGZO), which works even when bent and is compatible with plastic.

The chip design was equally important in the pursuit of sub-penny plastic processors: in this case, less was more.

“Even the simplest modern chips are overkill for what we need them to be able to do for our target applications,” Kumar said. “Our FlexiCore chips look like 1970s silicon chips because we greatly reduced the number of components on them through careful design.”

The UIUC team tested 4-bit and 8-bit processors and found that the 4-bit processors produced a yield of 81%, which is high enough for the chips to be manufactured for less than a penny each. (“Yield” refers to the percentage of chips that work.) The 4-bit processor has 2,104 devices (transistors and resistors), which is far less than the 56,000-plus devices on a plastic ARM processor that debuted last year with much fanfare, but hasn’t been shown to be manufacturable at scale and does not run multiple programs, as FlexiCore can.

The low gate count in FlexiCores improves yield and reduces the “bill of materials”—the amount of material needed to produce each chip.

Kumar noted that the semiconductor industry has mostly been concerned with improving performance and power efficiency. With this research, he and his team are pioneering flexible electronics with new application frontiers. The research will be presented at the International Symposium on Computer Architecture later this month.

“These chips combine the flexibility and cost benefits of plastic technology with the high yield and low bill of materials enabled by our architecture,” he said. “It will be interesting to see where we go from here.”


Suggested Items

Myths vs. Facts: The Printed Electronics Roundtable, Part 1

08/11/2022 | Andy Shaughnessy, Design007 Magazine
We recently held a roundtable with a team of printed electronic circuit experts from companies that run the gamut: John Lee and Kevin Miller of Insulectro, Mike Wagner of Butler Technologies, Tom Bianchi of Eastprint, and John Voultos of Sheldahl Flexible Technologies. In this first part of the roundtable, the participants dispel 10 common myths that have been floating around regarding printed electronic circuits (PEC). They also discuss the progress that’s been made in PEC development in just the past decade, and what the future may hold for this technology.

The Importance of Rigid-Flex PCB Design Guidelines

07/21/2022 | Cody Stetzel, Cadence Design Systems
I have the tendency to try to replicate the delicacies I’ve ordered at restaurants in my own kitchen. One of my latest attempts at creating restaurant-worthy dishes was a Korean pancake that’s crispy on the outside but soft on the inside. With my amateur cooking skills, it proved to be an impossible task—I could either make only a hard pancake or one that was total fluff. While I’m still struggling to figure out the trick to bringing together the different textures of a Korean pancake, I’ve had more success in bringing together the hardboard elements and flexible PCB elements of a rigid-flex PCB. Compared to making Korean pancakes, striking the right balance of flexibility and rigidity on a rigid-flex PCB is easy if you abide by rigid-flex PCB design guidelines.

FLEX Conference 2022: If You Build It, We Will Buy It

07/13/2022 | Nolan Johnson, I-Connect007
Key presentations from companies like Boeing highlight FLEX Conference and Exhibition 2022, held in concert with the annual SEMICON West show this week in San Francisco’s Moscone Center. SEMICON West claims to be “North America’s premier microelectronics exhibition and conference,” uniting players across the entire electronics manufacturing and design supply chain.

Copyright © 2022 I-Connect007. All rights reserved.