All Flex Conducts Successful Study on High Wattage Heaters for Medical Instruments


Reading time ( words)

Flexible circuit board and flexible heater specialist All Flex recently addressed that their customer base for Medical Diagnostic, DNA Testing, P.O.C. instruments and Cancer Diagnostics have been consistently needing to accommodate faster test results while also making their instruments and the corresponding thermal systems smaller. This resulted in the need for higher wattage heaters other than the traditional Kapton, polyimide, or silicone rubber heaters commonly available on the market. All Flex has come up with a successful solution for this particular problem: etched foil heaters.

One of the greatest demands on a etched foil flexible heater is with rapid warm-up and high wattages. All Flex has tested our high watt heaters up to 115 watts per square inch, which is 50% higher watt density compared to the next highest available. These tests result showed that etched foiled heaters stood up against the demands of Molecular Diagnostic/DNA testing, where fast warm-up and rapid cool down is required, with no degradation after 100,000 thermal cycles.

Study: High Wattage Polyimide Heater for Molecular/DNA and P.O.C. Instruments

  • 120 watts per square inch at 100 degrees Celsius
  • 18 watts per square centimeter at 100 degrees Celsius Voltage range 5V to 240V
  • Max temperature: 500F/260C
  • Available with RTD’s, Thermistors, and Thermocouples
  • Can be supplied with lead wires, ZIF termination or SMT connectors RoHS compliant
  • Meets UL94 V-0 Flammability
  • Maximum size:    22” by 22” / 560mm by 560mm
  • Profiling for uniform thermal system performance

Test Results After 100,00 Cycles

  • 1KV Dielectric – PASS
  • Voiding or Delamination – NONE
  • Resistance Change – NONE
  • Conductor Cracking or Damage – NONE

For more specific information on this study or to learn more about their services, please contact All Flex at www.allflexinc.com or www.allflexheaters.com.

Share

Print


Suggested Items

Joe Fjelstad Updates His Online Flex Workshop

08/13/2020 | Barry Matties, I-Connect007
Joe Fjelstad has been an innovator in flexible and rigid-flex technology for four decades. About 10 years ago, I-Connect007 helped Joe produce an online workshop on flex technology based largely on his book Flexible Circuit Technology, which was first published in 1994 and is now heading into its fifth edition. In this online video course, Joe offers a primer on flexible circuits, covering everything from the history of this technology through the most cutting-edge technologies.

Flex Workshop Update With Joe Fjelstad and Anaya Vardya

08/06/2020 | I-Connect007 Editorial Team
When Anaya Vardya, president and CEO of American Standard Circuits, heard that Joe Fjelstad, founder and CEO of Verdant Electronics, was releasing an updated version of his flexible circuit technology workshop, he knew ASC had to be a sponsor. We recently asked Joe and Anaya to discuss the flexible circuit technology workshop, as well as the ongoing need for flex and rigid-flex training—even in the time of COVID-19—as the demand for flex continues to rise.

I-Connect007’s Latest Innovation: Joe Fjelstad’s E-Workshop on Flexible Circuits

09/09/2020 | Pete Starkey, I-Connect007
Denied the prospect of physically attending conferences, symposia, or live workshops by travel and social-distancing restrictions, Pete Starkey welcomed the opportunity to enjoy a privileged preview of I-Connect007’s latest innovation in technical webinars: a series of e-workshops on flexible circuit technology with the industry’s leading authority—Joe Fjelstad.



Copyright © 2020 I-Connect007. All rights reserved.