PV Nano Cell Signs Agreement with Healthcare Giant to Develop Sensors Digital Printing Solution
June 10, 2020 | Globe NewswireEstimated reading time: 2 minutes
PV Nano Cell Ltd, an innovative provider of inkjet-based conductive digital printing solutions and producer of conductive digital inks, announced that it has signed, under NDA, an agreement with a well-known, world-leading multinational healthcare company to develop a new inkjet printing technology for the fabrication of sensors using resistor and gold inks.
As part of the funded project, PV Nano Cell will develop two project-dedicated inks. The first ink is a high resistance ink – resistor ink and the second ink is a gold based ink. After the successful completion of the ink development, PV Nano Cell will develop the printing process technology to allow mass-production inkjet printing of the sensors. The resistor ink is based on PV Nano Cell prior work and knowledge, developing breakthrough materials and process technologies for embedded passive components.
PV Nano Cell’s Chief Executive Officer, Dr. Fernando de la Vega, commented, “We are honored to have been selected by this world-renowned multinational company for the project. The technology we are developing is expected to result in a dramatic drop in the current cost of fabricating the sensors. PV Nano Cell is working on further developing and expanding of its technology to print embedded passive components. We have already printed resistors and also capacitors using conductive and dielectric ink and believe this is a strategic development applicable to many markets and applications. As recently announced, sensor solutions provider HENSOLDT together with Printed Electronics (PE) provider, Nano Dimension Ltd., recently succeeded in assembling the world-wide first 10-layer inkjet printed circuit board (PCB). The board carries a high-performance electronic structures soldered to both outer sides. We believe such advancements prove the need and feasibility of embedded passive components.”
PV Nano Cell’s Chief of Business Development Officer, Mr. Hanan Markovich commented, “The technology we are now developing is expected to have a dramatic impact on the bottom-line cost of production of our partner’s sensors. The development is well on its way and we’re expecting to meet all milestones as planned. We look forward to finish the development of the two inks and start working on the printing process. During the project, our DemonJet printer will be used to print both the resistor and gold inks. We further plan to use our printer to print dielectric ink as well. Using our 10 channels print head, the DemonJet is capable of printing multiple materials and thus print embedded passive components.”
Suggested Items
Boeing Opens Research & Technology Center in Japan
04/23/2024 | BoeingBoeing today opened a Boeing Research & Technology (BR&T) Center in Japan that will focus on innovation to enable the commercial aviation industry meet its goal of net zero carbon emissions by 2050.
Schweizer Electronic Appoints Thomas Gottwald as New Member of the Executive Board
04/23/2024 | Schweizer Electronic AGThe Supervisory Board of Schweizer Electronic AG has appointed Mr. Thomas Gottwald to the Executive Board as CTO (Chief Technology Officer) for a period of 3 years with effect from 1 May 2024.
US Department of Defense Selects Intel Foundry for Phase Three of RAMP-C
04/23/2024 | IntelThe U.S. Department of Defense (DoD) has awarded Intel Foundry Phase Three of its Rapid Assured Microelectronics Prototypes - Commercial (RAMP-C) program.
Real Time with... IPC APEX EXPO 2024: Industrial Quality Solutions from Zeiss
04/23/2024 | Real Time with...IPC APEX EXPOEditor Nolan Johnson and Herminso Gomez of Zeiss Group discuss the company's industrial quality solutions, with a focus on X-ray technology. Zeiss provides a range of microscopy options and Herminso highlights the advantages of X-ray technology for aerospace, medical, and consumer electronics sectors.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.