TTM Shines a Light on Optical Interconnect
April 24, 2017 | I-Connect007Estimated reading time: 2 minutes
Are embedded optics on PCBs set to make a breakthrough in the upcoming years? According to Dr. Craig Davidson, VP of Corporate Technology at TTM, it might be closer than you’d expect. In a recent interview with the I-Connect007 team, Craig outlines TTM’s current pursuit of high-volume manufacturing lines able to deliver embedded optical interconnect, what that would mean for the PCB industry, and why he thinks there will be manufacturing production capability by 2020.
Barry Matties: Craig, for context, tell us a little bit about the optical side of TTM and what you guys are doing there.
Craig Davidson: Sure. We’re engaged already with the optical groups of many large customers. As you probably know, there are optical products today that do not include onboard optical interconnect or inboard optical interconnect, but rather optical cables to the edge of the board. These include fiber connectors and transceivers embedded in connectors. TTM certainly supports networking companies with these kinds of products formally classified as optical.
What we’re really taking about here is the future as we bring optical signals on board, onto the printed circuit board directly embedded in the board for optical packages, line cards or backplanes.
Matties: Yes.
Davidson: The basic capability has been around for decades. I first got involved in it back in the year 2000 when there was a big push for onboard optical interconnect and just about every printed circuit board fabricator at the time was doing something around embedding fibers into boards. Many PCB fabricators have these kinds of processes. It’s relatively simple to do but it’s not a very happy solution.
You still have problems with 90° bends, for example, and the z-axis in the board, and you certainly have continuing difficulties associated with connectorizing the fibers. Also, importantly, is registration—making sure the fibers actually end up where they need to be. That’s a very difficult task. So those types of problems haven›t really been solved for a long time. The TTM team in Europe has been working on this for a long time now.
And you interviewed Marika Immonen on our team back in 2015, I believe. TTM now has technology we can offer that will allow embedded waveguides in boards. This includes polymer waveguides either buried inside a board or built-up on the board surface and with in-plane or 90° connectors. We›re working jointly with several consortia and individual companies to demonstrate this technology.
So that’s a brief history of where we have been and at least a little preview of what we can offer. TTM has a long experience of fabricating multimode waveguides for short-reach datacom applications. Now as silicon photonics at OEMs is pushing through, we are scaling technology to support their single-mode roadmaps. There we pursue both polymer- and glassbased waveguides. Polymers are very versatile, low cost and easy to fabricate, whereas glass provides low loss at the longer wavelengths and optical compliance with fibers. Single mode waveguides are looked at to provide complex routing between chips or to serve as “bridges” between sub-micron silicon waveguide and 9-micron fiber. In single mode, accuracy and registration both in waveguide fabrication and termination is critical.
To read the full version of this interview which appeared in the April 2017 issue of The PCB Magazine, click here.
Suggested Items
Big Win for Defense Production Act Budget Allocation in FY24 Budget
04/23/2024 | I-Connect007 Editorial TeamOne year ago, President Biden issued a determination that chips and packaging are critical for national security. Since that time, much work has been done to continue the conversation in Washington, elevating the importance of the entire chips value chain, and including printed circuit boards and substrates, without which chips cannot operate.
IDTechEx Examines the Opportunities for Wearables in Digital Health
04/19/2024 | IDTechExIDTechEx’s report, “Digital Health and Artificial Intelligence 2024-2034: Trends, Opportunities, and Outlook”, covers this ongoing trend in the consumer health wearables market and includes analysis of the opportunities and roadmap for biometric monitoring.
NCAB Appoints Tim Benjamin as New CFO
04/15/2024 | NCAB GroupNCAB Group has appointed Tim Benjamin as its new CFO. Tim has a long and broad experience of managerial business finance roles, including M&A and IT.
Plastronics and the New IPC Guidelines for In-mold Electronics (IME)
04/11/2024 | Barry Matties, I-Connect007In the ever-evolving world of electronics, the roads for the integration of electronics assemblies into 3D structures continue to grow into a set of technologies used to produce 3D plastronics parts and revolutionize mainly the automotive industry. IPC has been developing standards for this set of technologies, led by Francisco Fourcade, IPC electronics technology standards manager.
IEC USA Congratulates Bernie Consitt for 25 Years of Service
04/09/2024 | IECJoin us in celebrating Bernie Consitt's 25 years of service and camaraderie at IEC (International Electronic Components). Bernie has been instrumental in his role as Accounting Manager, helping to supervise, track, and evaluate day-to-day activities within the accounting team.