Industry 4.0–Inkjet Technology is Changing the World of PCB Manufacturing
March 15, 2017 | Wouter Brok, et al, Meyer Burger B.V.Estimated reading time: 2 minutes
Introduction
When the Germans coined the term Industry 4.0 back in 2011, it wasn’t clear to many what it actually stood for. Although the debate about all the nuances of the term’s meaning is still ongoing, one aspect of it is undisputed: The “computerization of manufacturing” is at the heart of it. Manufacturing techniques throughout many industries continue to become more and more digital. This is also true for PCB manufacturing. Several manufacturing steps offer incredible potential for digitalization. One prime example is the application of solder mask material using industrial inkjet technology.
Solder Mask Printing
The current manufacturing standard for solder mask application involves several process steps which have a significant cost impact:
- Pre-treatment of the PCB
- Full board coating (e.g., curtain coating)
- Artwork film production (photomask)
- UV exposure
- Development
- Post cure
Utilizing state of the art digital inkjet printing for the application of solder mask on PCB boards, the number of process steps can be reduced:
- Pre-treatment of the PCB
- Digital inkjet printing including in situ UV curing
- Post Cure
The benefits of this simplified manufacturing process are obvious. Besides the reduction in required capital equipment and associated labor, the digital process also significantly reduces the use of process chemicals and therefore also the related handling and disposal cost. Overall, the environmental benefits are enormous. Last but not least is the reduction in manufacturing turnaround time—an important asset in to-day’s fast moving electronics business.
Unique Characteristics of Inkjet
Inkjet technology is widely used in homes and offices all over the world for traditional printing applications. Although the fundamental concept of modern industrial inkjet applications is comparable to those printers, there are significant differences. Industrial use of inkjet technology is characterized to a large degree by the type of materials which are deposited. In-stead of traditional ink, materials such as resists, adhesives, conductive inks, polymers and their likes are deposited. Inkjet is a selective coating technology. This means that material is only deposited where it is needed. In the case of solder mask printing, this not only reduces material consumption, but also avoids solder mask material in via holes and other areas where it is difficult to remove or simply not desired. Flushing uncured solder mask material from high aspect ratio holes in the development step is a known challenge in the PCB industry and is completely avoided by inkjet printing.
To read the full version of this article which appeared in the February 2017 issue of The PCB Magazine, click here.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.