Cadence AI-Driven Multiphysics System Analysis Solution Enables Wistron to Dramatically Accelerate Product Development
December 22, 2023 | Cadence Design SystemsEstimated reading time: 1 minute
Cadence Design Systems, Inc. announced that Wistron, a leading technical service provider (TSP), has adopted and deployed the new AI-driven electromagnetic (EM) in-design analysis workflow, including the Cadence® Optimality™ Intelligent System Explorer and the Cadence Clarity™ 3D Solver, to design a complex 800G network switch. Using the Optimality Explorer’s AI-driven optimization technology and the Clarity 3D Solver for fast, accurate and scalable EM in-design analysis, Wistron was able to analyze large volumes of data—improving overall design reliability while realizing a 2X improvement in turnaround time (TAT).
Legacy 3D solvers typically deliver slower simulation results due to excessive run times and memory usage. In contrast, the Clarity 3D Solver, with its distributed multiprocessing technology and virtually unlimited capacity, quickly analyzes large and complex PCB, IC packaging and complete systems without compromising accuracy. Its exceptional performance is further fueled by the Optimality Explorer, a generative AI-driven, in-design multiphysics system analysis and optimization solution that allows design engineers to explore 3D EM and high-speed signal and power integrity results efficiently and effectively. By revealing design configurations that may not be manually achievable, the Optimality Explorer streamlines design iterations—resulting in shorter and more efficient design cycles.
“By adopting Cadence’s AI-driven optimization solution including Optimality Explorer alongside the Clarity 3D Solver for our 800G network switch and GPU server, we leveraged the design of experiments model to explore multiple simulations quickly and realized far more robust designs with a 2X improvement in TAT,” said Christopher Huang, vice president of the Enterprise and Networking Business Group at Wistron. “With a shift left of AI-enabled multiphysics systems analysis into our electronic design workflow, we are not only improving product performance but gaining valuable design insight and engineering efficiencies.”
“As high-speed electronic systems continue to grow in complexity to meet market demands, Cadence is committed to developing software solutions that address multiphysics challenges and the associated scaling demands,” said Ben Gu, corporate vice president of the Multiphysics System Analysis Group at Cadence. “Wistron has embraced the Cadence multiphysics system analysis portfolio to expedite design throughput and engineering turnaround time. The Clarity and Optimality solutions, coupled with HPC, are the trifecta for next-generation design success.”
The Clarity 3D Solver and the Optimality Explorer support Cadence’s Intelligent System Design™ strategy, which enables customers to accelerate system innovation.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.